Signum SG1V EVO TG ARGB
Efficient cooling system
The Signum SG1V Evo TG ARGB chassis is equipped with numerous and extensive vents as well as outstandingly airy mesh front panel. Thanks to this, the four high pressure fans – Stella HP ARGB 120 mm CF – provide great amounts of air flow, which translates into very low temperatures of components installed inside.
Tempered glass panel
The large side panel made of tempered glass together with the ARGB lighting system allows the presentation of tastefully selected and assembled components installed inside the SilentiumPC Signum SG1V Evo TG ARGB chassis.
Thanks to the extraordinarily efficient ventilation, the components installed inside – even very powerful ones – will operate at low temperatures. This, in turn, often translates into higher performance (increased clock speed in “boost” mode), as well as into less noise generated, for example, by graphics card fans. The side panel made of tempered glass in combination with the addressable ARGB lighting system will provide a stunning display of tastefully selected components, as well as great possibilities for individualisation of the whole. The spacious structure provides enough space for most of the components popular in this segment: the air tower cooler can be 161 mm tall, and the graphics card can be 325 mm long. Thus, the Signum SG1V Evo TG ARGB chassis will work as a basis for even very powerful computers equipped with e.g. 8-core and high-clocked processor or AMD Radeon RX 5700 XT class graphics card, Nvidia GeForce RTX 2070 Super or their successors.
Addressable RGB LED lighting system
Signum SG1V Evo TG ARGB is equipped with an addressable LED lighting system in the form of four Stella HP ARGB 120 mm CF fans and Nano-Reset ARGB controller. It is fully compatible with other SilentiumPC ARGB (5V) devices, such as Navis Evo ARGB, ARGB air coolers, Aurora Stripes ARGB and Stella HP / Corona HP ARGB fans.
Stella HP ARGB 120 CF
Four illuminated high-pressure fans are responsible for cooling the components inside the Signum SG1V Evo TG ARGB case: Stella HP ARGB 120 mm CF. They ensure high airflow, and thus, low temperatures of the computer components.
Nano-Reset ARGB controller with splitter
The chassis is equipped with Nano-Reset ARGB controller and a splitter, which allows to connect up to 5 fans and 5 ARGB devices. They allow you to cycle through different effects and colors using a designated button located at the front of the case, even if your rig is not equipped with an ARGB compatible motherboard.
AIO LC Compatibility
Signum SG1V Evo TG ARGB offers enough space for the integrated sets of liquid cooling (AIO LC). The 120/240/360 sized ones will fit at the front, 120/240 on top (maximum height of RAM modules: 32 mm) and another 120 mm radiator can be installed at the rear of the case.
I/O panel: 2× USB 3.2 Gen1
All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen1, audio ports and POWER and RESET buttons.
SSD mounts behind the motherboard
Two 2,5" devices (e.g. SSD drives) can be mounted in bays designed specifically for this purpose and located on the other side of the motherboard tray, in a cable management chamber of the chassis. In order to access it, the user has to unscrew the side panel’s bolts and remove it. Such mounted SSDs do not take up space intended for the 3,5" hard drives.
Full set of dust filters
In SilentiumPC Signum SG1V Evo TG ARGB, there are five intake dust filters included (three at the front, one on top and one under the PSU) to help fight off the dust and keep its interior clean. The users can install up to eight 120 mm fans inside the chassis.
Cable arrangement system
The enclosure is equipped with the cable arrangement system which consists of numerous cable entries, and a large amount of space behind the motherboard tray allows users to arrange the cables very precisely without interrupting the airflow that takes place inside of the case.
- HEIGHT [mm]:447
- WIDTH [mm]:216
- DEPTH [mm]:413
- BOX SIZE [mm]:473×266×485
- NET WEIGHT[kg]:5,10
- GROSS WEIGHT [kg]:6,1
- HDD/SSD:2× 2,5", 2× 2,5"/3,5"
- 5,25" ODD Bays:0
- MOTHERBOARD:ATX / microATX / mITX
- CPU COOLER [MM]:161
- GPU LENGTH [MM]:325
- PSU LENGTH [MM]:160
- Logistic data
- Product color:BLACK
- Product code:SPC248
- PRODUCT TYPE:PC Case with tempered glass
- FANS MAX:8
- FANS INCLUDED:4
- INCLUDED FANS MODEL NAME:Stella HP ARGB 120 mm CF
- INCLUDED FAN SPEED ±10% [RPM]:1200
- MOTHERBOARD RGB SOFT CONTROL
- Asrock Polychrome Sync (4-pin RGB):NO
- Asus Aura (4-pin RGB):NO
- BioStar Vivid LED (4-pin RGB):NO
- EVGA RGB header (4-pin RGB):NO
- Gigabyte RGB (4-pin RGB):NO
- Gigabyte RGB Fusion (5-pin RGBW):NO
- MSI Mystic Light (4-pin RGB):NO
- MOTHERBOARD A-RGB SOFT CONTROL
- Asrock Polychrome Sync:YES
- Asus Aura Sync:YES
- Gigabyte RGB Fusion 2.0 (3-pin):YES
- Gigabyte RGB Fusion 2.0 (2+1-pin):YES
- MSI Mystic Light:YES
- I/O PORTS
- USB 3.2 GEN 1 (type A):2
- USB 2.0:0
- HEADPHONES AND MICROPHONE:YES
- SD/MICROSD CARD READER:NO
- FAN CONTROLLER;YES (SPLITTER)
- LED BUTTON:NO
- RESET BUTTON:YES
- SilentiumPC Signum SG1V EVO TG ARGB chassis
- Nano-Reset controller with splitter
- 4 × Stella HP ARGB 120 mm CF fan
- mounting accessories
- User manual